Skip to content Skip to footer


  • Stainless steel construction with some aluminum components
  • Stainless steel conveyor with flight bar system for advancing donuts
  • Automatic turning and dispensing of donuts
  • Holds 4 donuts per flight bar pocket
  • On Mark VI Standard, conveyor flight bars are spaced 3¾ inches from center to center. Flight bars are round, 3/8″ diameter
  • On Mark VI-Deep, the conveyor flight bars are spaced 4½” from center-to-center to accommodate larger donuts
  • Frying time dial sets frying times from approximately 55 to 360 seconds
  • Thermostat temperature adjustment
  • High durability, low wattage-density heating elements
  • High temperature limit switch – cuts power at approximately 450°F
  • Kettle drain with cap (order extended drain and valve separately)


  •  Extended drain with valve (Item# MK-0546). The drain extends below the fryer and requires a hole in the fryer’s supporting table
  • 2 turner and 3 turner configurations available for Mark VI-DEEP

Technical Data:

  • Frying Area: 43” x 20”

Mark VI:

  • Frying Depth: 4.5”
  • Shortening Capacity: 124 lbs
  • Weight: 190 lbs

Mark VI Deep:

  • Frying Depth: 6.5”
  • Shortening Capacity: 180 lbs
  • Weight: 200 lbs

Donut Robot Mark VI